Dell OMSA Voltage sensor detected a failure value

Dell.WindowsServer.ServerAdministrator.Alert.1154 (Rule)

Knowledge Base article:

Summary

Voltage sensor detected a failure value

Sensor location: %Location in chassis%

Chassis location: %Name of chassis%

Previous state was: %State%

If sensor type is not discrete:

Voltage sensor value (in Volts): %Reading%

If sensor type is discrete:

Discrete voltage state: %State%

Causes

A voltage sensor in the specified system exceeded its failure threshold. The sensor location, chassis location, previous state, and voltage sensor value are provided.

Cause

Resolutions

The arg1 sensor detected an error with a value of arg2 Volts.

Do one of the following to resolve the issue: 1) Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. 2) Re-configure the system to a minimum configuration, and verify if the sensor displays a normal value, otherwise replace the system board. 3) If the sensor identified is a processor voltage sensor, remove the processor module and inspect processor socket, and replace if required. If the issue persists, contact your service provider.

Resolutions

A Critical message refers to a significant event that indicates actual or imminent loss of data or loss of function. Change the environment, such as cooling or power as appropriate, or replace the failed component.

Element properties:

Target

Dell.WindowsServer.Server

Category

Alert

Enabled

True

Event Source

Server Administrator

Alert Generate

True

Alert Severity

Error

Alert Priority

Normal

Remotable

True

Alert Message

Dell OMSA Voltage sensor detected a failure value

Event Description : {0}

Event Log

System

Member Modules:

ID	Module Type	TypeId	RunAs
DS	DataSource	Microsoft.Windows.EventProvider	Default
Alert	WriteAction	System.Health.GenerateAlert	Default
WriteToDW	WriteAction	Microsoft.SystemCenter.DataWarehouse.PublishEventData	Default

Source Code:

<Rule ID="Dell.WindowsServer.ServerAdministrator.Alert.1154" Enabled="true" Target="Dell.WindowsServer.Server" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.LogicalDevice"]/DeviceID$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <Or>

              <Expression>

                <SimpleExpression>

                  <ValueExpression>

                    <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

                  </ValueExpression>

                  <Operator>Equal</Operator>

                  <ValueExpression>

                    <Value Type="UnsignedInteger">1154</Value>

                  </ValueExpression>

                </SimpleExpression>

              </Expression>

              <Expression>

                <SimpleExpression>

                  <ValueExpression>

                    <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

                  </ValueExpression>

                  <Operator>Equal</Operator>

                  <ValueExpression>

                    <Value Type="UnsignedInteger">5154</Value>

                  </ValueExpression>

                </SimpleExpression>

              </Expression>

            </Or>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">Server Administrator</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Dell.WindowsServer.Rule.1154"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/EventDescription$</AlertParameter1>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>

        <SuppressionValue>$Data/Channel$</SuppressionValue>

        <SuppressionValue>$Data/PublisherName$</SuppressionValue>

        <SuppressionValue>$Data/LoggingComputer$</SuppressionValue>

        <SuppressionValue>$Data/EventCategory$</SuppressionValue>

        <SuppressionValue>$Data/EventLevel$</SuppressionValue>

        <SuppressionValue>$Data/UserName$</SuppressionValue>

        <SuppressionValue>$Data/EventNumber$</SuppressionValue>

        <SuppressionValue>$Data/EventDescription$</SuppressionValue>

      </Suppression>

      <Custom1/>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

    <WriteAction ID="WriteToDW" TypeID="SCDW!Microsoft.SystemCenter.DataWarehouse.PublishEventData"/>

  </WriteActions>

</Rule>